cable glands accessories copper cable glands cable glands kits copper cable lugs

Cable Gland

Alco Cable Gland

Size	:	G 204 TO G 755
Application	:	Used with SWA, plastic and rubber sheathed cables. Used indoor conditions inner ring frames positive armour clamp an earth continuity. Material is brass and nickel plated.

Marine Cable Gland

Size	:	10 mm to 70 mm
Application	:	Used for various marine applications.

TRS Cable Gland

Size	:	16 mm to 32 mm
Application	:	While not manufactured to a specific standard, are accepted by many contractors and uses as satisfactory method of securing flexible cables.

Wiping Gland

Size	:	As per drawings and specifications.

Our brass parts range in cable glands include PG cable gland, BW 2 part cable gland, BW 3 part cable gland, CW cable gland, E1W cable gland, A2 type cable gland, TRS type cable gland and alco type cable gland.

Currently available cable glands accessories :

Lock Nuts
Earthing Tags
Cable Gland Kit Packaging
PVC Shrouds

A2 Type Cable Gland

To BS 6121 pt. 1 suitable for unarmoured or rubber sheathed cables
Used for indoor as well as outdoor applications
Gland size: From 16 mm to 75 mm.

PG Cable Gland

To DIN - 46320/46255 .
Available with strain relief facility with round or hex intermediate sockets.
Available in long and short antithreads.
Gland size: PG 9 to PG 56

BW 2 Part Cable Gland

To BS 6121 pt.
Most suitable for SWA, plastic of rubber (Elastomer) sheathed cables.
Used in dry indoor conditions.
No loose parts and easy to install.
Save times & money.
Can be supplied with integral earth facility.
Gland size: 20 mm to 75 mm (S & L)

E1W Cable Gland

To BS 6121 pt. 1 suitable for SWA or rubber sheathed cables.
Outer seal grips bedding layer of cable for use in most climatic conditions.
Weather proof and water proof.
Design has seperate armour lock rings.
Can be supplied with integral earth facility.
Gland size: 20 mm to 75 mm (S & L)

BW 3 Part Cable Gland

To BS 6212 pt. 1 most suitable for SWA plastic or rubber sheathed cables.
Used indoor conditions.
Seperate locking ring helps to clamp the armour properly.
Can be supplied with integral earth facility.
Gland size: 20 mm to 75 mm (S & L)

TRS Type Cable Gland

While not manufactured to a specific standard, are accepted by many contractors and users as satisfactory method of securing flexible cables.
Gland size: 16 mm to 32 mm

CW Cable Gland

To BS 6212 pt. 1 most suitable for SWA plastic or rubber sheathed cables.
Outer seal grips sheath of cable for use in most climatic conditions.
Weather proof and water proof design.
Has seperate armour lock rings, can be supplied with integral earth facility.
Gland size: 20 mm to 75 mm (S & L)

Alco Type Cable Gland

Used with SWA, plastic and rubber sheathed cables.
Used in indoor conditions.
Inner ring ensures positive armour clamp and earth continuity.
Gland size: G 204, G206, G254, G256,G 324,G 326, G 405, G 503, G 505,G 636,G 753,G 755
Gland size: 20 mm to 75 mm (S & L)

Cable Gland Kit Packing

Gland Kit is a ready to use pack
It contains Glands, Lock Nuts, Earth Tags and PVC Shrouds.
Contains two sets upto 32 mm and one set for bigger size
It is a convenient way for the user to purchase complete cable termination as he is assured of all the required parts.
Free header card with customer home and logo can be provided. etc

CABLE GLAND SECTION CHART
FOR BS 6346 TYPE SWA CABLES

600/1000 V copper Conductor PVC Insulated with Steel Wire Armour Cable
Cable Conductor Size		Number of Cores
Area mm²	Neutral	1	2	3	3�	4	5	7	10	12	19	27	37	48
1.5			20s	20s		20s	20s	20s	20	20	25	25	32	32
2.5			20s	20s		20s	20s	20	25	25	25	32	32	40
4			20s	20s		20	20	25	25	25	32	40	40	50
6			20s	20		20
10			25	25		25
16			25	25		25
25	16		25	25	32	32
35	16		25	32	32	32
50	25	25	32	32	32	40
70	35	25	32	40	40	40
95	50	25	40	40	50	50
120	70	25	40	50	50	50
150	70	32	40	50	50	50
185	95	32	50	50	63	63
240	120	40	50	63	63	63
300	150	40	63	63	75	75
300	185				75
400	185	50	63	75	75	75
500		50
630		50
800		63
1000		63
Glands manufactured as per BS 6121 PT 1 : 1989 for use with PVC SWA PVC 600/1000 V cables to BS 6346 : 1989 NOTE : This selection chart is given for guidance only Actual cable dimensions must be considered before making final selections as these may vary due to manufacturing tolerances provided in BS 6346 : 1989

CABLE GLAND SECTION GUIDELINES

	CABLE TYPE
	UNARMOURED	SINGLE WIRE ARMOUR
CONDITION	SEAL	NO SEAL	OUTER SEAL	INNER & OUTER SEAL
Clear & Dry	A2	BW	CW	E1W
External Moisture	A2		CW	E1W
Internal Moisture	A2			E1W
Dust & Oil	A2		CW	E1W
BW General purpose indoor application. A2, CW, E1W indoor and outdoor application. ENTRY THREAD : Normally glands have metric entry thread forms. Metric threads 1.5 mm pitch are standard upto 75 mm. Other thread forms like IMPERIAL, PG, NPT are also available on request.

	Cable Glands and Wiring Accessories		Earthing Accessories and Equipments
	Brass Fittings Sanitary Fittings and Pipe Fittings		Brass Building Hardware
	Brass Electrical		Fasteners Brass Copper SS MS
	Brass Turned Components Brass Components		Brass Parts Casting Copper Stainless Steel fitting Components

Related Websites

Brass Wiring Accessories Brass Cable Glands Accessories Sanitary Fittings and Pipe Fittings Brass Electrical Accessories
Brass Fasteners Brass Fastener Inserts Brass Electrical Fitting Components Brass Turned Components Brass
Cable Glands Brass Cable Glands Earthing Equipments Earthing Accessories Brass Earthing Accessories
and Equipments Brass Fittings Brass Sanitary Fittings Brass Pipe Fittings Brass Parts Casting Copper
Stainless Steel fitting Components Brass Marine Cable Gland Brass TRS Cable Gland Brass Wiping
Gland Brass Building Hardware Brass Sanitary Fitting Hex Nipple Extension Piece Brass
Earthing Rods Brass Fitting Parts Brass Components Brass Screws

Site by : Skynet Technologies